ECOSPEED 110D31-0760 high speed servo motor
Technical specifications
| Certificates | UL |
| Flange | 110 mm |
| Max. DC link voltage | 560 VDC |
| Maximum speed | 7400 rpm |
| Peak torque | 10.1 Nm |
| Stall torque | 5.2 Nm |
Overview
The ECOSPEED 110D31-0760 is a high speed servo motor in the ECOSPEED 110D series, designed according to the power based on speed principle. With a 110 mm flange, max. DC link voltage of 560 V DC and a maximum speed of 7400 rpm, it delivers up to 10.1 Nm peak torque and 5.2 Nm stall torque in a compact, robust housing. Paired with ECOVARIO 414 on a 325 V DC link it offers about 4.4 Nm rated torque at 3000 rpm and 1382 W rated power, while ECOVARIO 616 on 560 V DC unlocks 4000 rpm rated speed and 1340 W rated power. The motor is IP65 and UL certified, which supports use in demanding industrial environments and simplifies approval for international markets.
Advantages
Optimized for high speed: The ECOSPEED 110D31-0760 is engineered to deliver maximum torque at high speeds, up to 7400 rpm, which helps shorten cycle times in dynamic axes.
High precision and synchronization: Very good synchronization behavior and a wide choice of high resolution incremental, absolute and SinCos encoders support precise positioning, smooth motion and repeatable processes in multi axis systems.
Flexible operating points: Matching ECOVARIO 414 and 616 servo amplifiers allow you to choose between higher torque at 3000 rpm on 325 V DC or higher speeds up to 7400 rpm on 560 V DC, using the same motor type.
Configurable for each machine: Customer specific winding options and mechanical variants such as shaft with key, gear and shaft seal ring IP54 make it possible to tune the axis to the required load profile and environment from quantity one.
Where it fits
The ECOSPEED 110D31-0760 is a strong choice for high speed rotary axes that combine significant torque with demanding motion profiles. Typical examples include:
Packaging and filling machines that require fast indexing and reliable positioning.
Semiconductor and electronics manufacturing equipment with precise, synchronized movements.
Robotics, handling and assembly systems where high throughput and accurate motion at up to 7400 rpm are important.
General automation and test stands that need a compact, UL certified motor with 110 mm flange and high dynamic performance.
Interfaces
Servo amplifiers:
Designed for operation with ECOVARIO 414, 415D, 616 and 616D servo amplifiers, covering both 325 V and 560 V DC link systems with a single motor platform.Encoder systems:
EDS capable incremental encoders from 8,000 to 160,000 increments per revolution
Absolute encoders up to 19 bit single turn and 12 bit multi turn with BiSS or HIPERFACE protocols
SinCos encoders with 1000 periods per revolution, so feedback can be matched to the control concept and required resolution.
Holding brake:
Optional integrated 10 Nm holding brake for axes that must hold position safely when power is removed, which increases the motor length by about 60 mm and adds roughly 2 kg to the mass.Mechanical and cabling options:
Mechanical versions such as shaft with key, gear options and shaft seal ring IP54, together with M17 connector sets and pre assembled motor, motor or brake and encoder cables for ECOVARIO amplifiers, support reliable wiring and straightforward integration into industrial machines.
